Items where Subject is "Engineering"

A

ABBAS, Yasir M. O. and Asami, Kenichi (2021) Design of Software-Defined Radio-Based Adaptable Packet Communication System for Small Satellites. Aerospace, 8 (6). p. 159. ISSN 2226-4310

Abd. Wahid, Nor Azila and Hashemi, Azadeh and Evans, John J. and Alkaisi, Maan M. (2021) Conductive Bioimprint Using Soft Lithography Technique Based on PEDOT:PSS for Biosensing. Bioengineering, 8 (12). p. 204. ISSN 2306-5354

Abdulrahim, Mahabuba and Bourezg, Abdrabbi and Jamal, Badr and Ahmed, Abdulaziz (2023) Design and Development of Hybrid Solar-Wind Energy Storage System for Storage Capacity. Journal of Engineering Research and Reports, 24 (1). pp. 49-59. ISSN 2582-2926

Al-Azzawi, Rana Alaa Shareef and Al-Alwan, Hoda A. S. (2022) History and Prospects of Sustainable Textile Architecture. In: Technological Innovation in Engineering Research Vol. 4. B P International, pp. 1-20. ISBN 978-93-5547-492-6

Alves, Cláudia P. A. and Prazeres, Duarte Miguel F. and Monteiro, Gabriel A. (2021) Minicircle Biopharmaceuticals–An Overview of Purification Strategies. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Amibo, Temesgen Abeto and Beyan, Surafel Mustafa and Damite, Tsegaye Markos and Xu, Jinyang (2021) Novel Lanthanum Doped Magnetic Teff Straw Biochar Nanocomposite and Optimization Its Efficacy of Defluoridation of Groundwater Using RSM: A Case Study of Hawassa City, Ethiopia. Advances in Materials Science and Engineering, 2021. pp. 1-15. ISSN 1687-8434

Araújo, I.R.S. and Campilho, R.D.S.G. and Ramalho, L.D.C. (2024) Numerical Tensile Loading Evaluation of Scarfed Adhesively-Bonded Joints Using the Extended Finite Element Method. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 62-74. ISBN 978-81-974068-0-5

Argumedo-Delira, Rosalba and Gómez-Martínez, Mario J. and Uribe-Kaffure, Ramiro (2021) Trichoderma Biomass as an Alternative for Removal of Congo Red and Malachite Green Industrial Dyes. Applied Sciences, 11 (1). p. 448. ISSN 2076-3417

Azmaiparashvili, Zaal and Otkhozoria, Nona (2021) Mathematical Model for Studying the Accuracy Characteristics of Devices for Measuring the Resonant Frequency of Oscillatory Systems. In: New Approaches in Engineering Research Vol. 5. B P International, pp. 121-132. ISBN 978-93-91312-97-8

B

Babagoli, Rezvan and Ameli, Alireza and Anjanapura, Raghu V. (2021) Influence of Soybean Oil on Binder and Warm Mixture Asphalt Properties. Advances in Materials Science and Engineering, 2021. pp. 1-16. ISSN 1687-8434

Bhuiyan, Md Ratan and Azam, Md Rabiul and Hossain, Badal and Aziz, Md Taruk and Al Galib, Md Abdullah (2023) Acknowledging the Challenges of Constructing in Regions with Low Temperature. World Journal of Engineering and Technology, 11 (04). pp. 902-916. ISSN 2331-4222

Boateng, Eric and Kankam, Charles K. and Danso, Anthony K. and Ayarkwa, Joshua and Acheampong, Alex (2023) Assessing Compressive Strength of Concrete with Waste Automobile Tire and Palm Kernel shells as Aggregates. Journal of Engineering Research and Reports, 24 (6). pp. 1-12. ISSN 2582-2926

Bondom, Romaric Lebon and Lango-Yaya, Ernest and Denissio, Mireille Morissi and Rafai, Clotaire Donatien and Moulo-Oli, Alban Thibaut and Dalenga, Zéphirin Vogbia and Djeintote, Marceline and ., Mossoro-Kpindé and Koffi, Boniface (2024) Contribution to the Study of Fungal Strains Contaminating Peanut Pastes in Bangui (Central African Republic). Journal of Biomedical Science and Engineering, 17 (05). pp. 97-106. ISSN 1937-6871

Bramblett, Lauren and Bezzo, Nicola (2023) Epistemic planning for multi-robot systems in communication-restricted environments. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Brelle, Laura and Renard, Estelle and Langlois, Valerie (2021) Antioxidant Network Based on Sulfonated Polyhydroxyalkanoate and Tannic Acid Derivative. Bioengineering, 8 (1). p. 9. ISSN 2306-5354

C

Cao, Hui and Zhuo, De-Bing (2021) Fast Sound Source Localization Based on SRP-PHAT Using Density Peaks Clustering. Applied Sciences, 11 (1). p. 445. ISSN 2076-3417

Chakraborty, Debashon and Rahman, Md Maruf and Joy, Zihad Hasan and Islam, Md. Ashikul and Shufian, Abu and Sheikh, Protik Parvez and Alam, Sadman Shahriar (2024) Enhanced Security and Efficiency in Attendance Management: A Novel RFID and Arduino Integrated System. Journal of Engineering Research and Reports, 26 (5). pp. 59-65. ISSN 2582-2926

Chen, Quan and Zhang, Jiajia and Huang, Anguo and Wei, Pengyu (2021) Study on Wear Resistance of Ti-6Al-4V Alloy Composite Coating Prepared by Laser Alloying. Applied Sciences, 11 (1). p. 446. ISSN 2076-3417

Chen, Yuanyuan and Qi, Huiping and Li, Yongtang and Hua, Lin and Eisenlohr, Philip (2021) Establishment of Thermal Ductile Fracture Criterion for As-Cast 42CrMo Steel and Its Application in Hot Ring Rolling Process. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Chikwe, A. O. and Nwanwe, O. I. and Duru, U. I. and Nduwuba, G. O. and Duruonyeaku, A. N. (2023) Investigating the Impact of Sieve Analysis on the Choice of Gravel Pack Design for Wells in Unconsolidated Sandstone Formations in the Niger Delta. Journal of Engineering Research and Reports, 24 (2). pp. 39-49. ISSN 2582-2926

Chinyere E., Ibeaja, Adamma and Chiagoziem, Ugorji, Chinonso (2024) The Inhibitive Action of Ocimum gratissimum leaf Extract on Mild Steel Corrosion using the Ultra Violet Light. Journal of Engineering Research and Reports, 26 (6). pp. 273-282. ISSN 2582-2926

Citarella, Roberto and Giannella, Venanzio (2021) Additive Manufacturing in Industry. Applied Sciences, 11 (2). p. 840. ISSN 2076-3417

Cortbaoui, Patrick E. and Ngadi, Michael O. (2024) Optimization of Postharvest Handling of Eggplant Using the Taguchi Technique. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 45-61. ISBN 978-81-974068-0-5

Coulibaly, Mory and Ba, Makhaly and Thiam, Macodou and Diouf, Babacar (2023) Performance Evaluation of Asphalt Concrete Based on Basalt Aggregates of Diack and Quartzite of Bakel. Open Journal of Civil Engineering, 13 (04). pp. 695-705. ISSN 2164-3164

D

Daget, Yidnekachew and Zhang, Hong (2021) Determining the Evaluation of Experts’ Preferences for Selection of Suitable Industrialized Building Systems. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 192-203. ISBN 978-93-90768-48-6

Dahab, Mohamed Hassan and Bakheit, Salma Ishag S. and Abdallah, Omer A. and Hamad, Salih F. E. (2023) Mechanization Assessment of Field Operations for Production of Sugar Cane in the White Nile Area-Sudan. Journal of Engineering Research and Reports, 25 (4). pp. 9-16. ISSN 2582-2926

Danaci, David and Webley, Paul A. and Petit, Camille (2021) Guidelines for Techno-Economic Analysis of Adsorption Processes. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Deng, Libo (2024) Research and Application of Advanced Detection of Water Hazards in Coal Mine Bore-Hole. Engineering, 16 (07). pp. 181-187. ISSN 1947-3931

Duan, Jiayu and Yang, He and Chen, Xiaobo (2024) The Acoustic Emission Characterization of Mechanical Damage of Geopolymer Recycled Concrete. Journal of Engineering Research and Reports, 26 (5). pp. 53-58. ISSN 2582-2926

E

E. S. Nosseir, Ahmed and Cervone, Angelo and Pasini, Angelo (2021) Review of State-of-the-Art Green Monopropellants: For Propulsion Systems Analysts and Designers. Aerospace, 8 (1). p. 20.

Eltahan, Eman (2023) Fabric-structural Parameters Affecting the Mechanical Properties of Fabric-cement Composites. Journal of Engineering Research and Reports, 25 (7). pp. 82-93. ISSN 2582-2926

Ezeanyim, O. C. and Nwankwo, C. O. and Umeozokwere, A. O. (2020) Relationship between Worship Time and Attendance in Orthodox Church, Southern Nigeria. Journal of Engineering Research and Reports, 19 (1). pp. 6-12. ISSN 2582-2926

F

Fayzullin, Alexey and Bakulina, Alesia and Mikaelyan, Karen and Shekhter, Anatoly and Guller, Anna (2021) Implantable Drug Delivery Systems and Foreign Body Reaction: Traversing the Current Clinical Landscape. Bioengineering, 8 (12). p. 205. ISSN 2306-5354

Forhad, Shamim and Hossen, Md Shahadat and Noman, Shibly and Diba, Iffat Ara and Mahmud, Fuad and Ullah, Md. Oli and Hossain, Suraiya and Shuvo, Md. Riazat Kabir (2024) Influence of a Dual Axis IoT- Based Off-Grid Solar Tracking System and Wheatstone Bridge on Efficient Energy Harvesting and Management. Journal of Engineering Research and Reports, 26 (3). pp. 125-136. ISSN 2582-2926

Fu, Chao and Roussanaly, Simon and Jordal, Kristin and Anantharaman, Rahul (2021) Techno-Economic Analyses of the CaO/CaCO3 Post-Combustion CO2 Capture From NGCC Power Plants. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

G

Gao, Xuhe and Tian, Weiping and Li, Jiachun and Qi, Hongliang and Zhang, Zhipei and Giorgio, Ivan (2021) Research on Prediction Model of Prestress Loss of Anchor Cable in Soil-Rock Dual-Structure Slope. Advances in Materials Science and Engineering, 2021. pp. 1-10. ISSN 1687-8434

Gemignani, Matteo and Marcuccio, Salvo (2021) Dynamic Characterization of a High-Altitude Balloon during a Flight Campaign for the Detection of ISM Radio Background in the Stratosphere. Aerospace, 8 (1). p. 21.

Giannarou, Sofia and Tsatiris, Michael (2021) Designing Bioclimatic Buildings to Minimize Energy Consumption: A Study on the Role of Education. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 146-157. ISBN 978-93-91473-64-8

Goswami, Manish M. and Jambhulkar, Sachin (2021) Study on Auto Sector Stock Price Trend Prediction by using Decision Tree. In: New Approaches in Engineering Research Vol. 5. B P International, pp. 57-67. ISBN 978-93-91312-97-8

Guo, Zhenkun and Hu, Guobiao and Jiang, Jingchao and Yu, Liuding and Li, Xin and Liang, Junrui (2021) Theoretical and Experimental Study of the Vibration Dynamics of a 3D-Printed Sandwich Beam With an Hourglass Lattice Truss Core. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Gupta, Divya and Santoso, Jeffrey W. and McCain, Megan L. (2021) Characterization of Gelatin Hydrogels Cross-Linked with Microbial Transglutaminase as Engineered Skeletal Muscle Substrates. Bioengineering, 8 (1). p. 6. ISSN 2306-5354

H

Haider, Asfia and Waseem, Ahmad and Karpukhina, Natalia and Mohsin, Sahar (2020) Strontium- and Zinc-Containing Bioactive Glass and Alginates Scaffolds. Bioengineering, 7 (1). p. 10. ISSN 2306-5354

Hakeem, Israa J. and Abeyie, Melese and Rehman, Rabia (2022) Identification of Hippuric Acid and Phenols in the Urine of Workers with Occupational Exposure. Adsorption Science & Technology, 2022. pp. 1-8. ISSN 0263-6174

Huang, Tianjiao and Terrell, John A. and Chung, Jay H. and Chen, Chengpeng (2021) Electrospun Microfibers Modulate Intracellular Amino Acids in Liver Cells via Integrin β1. Bioengineering, 8 (7). p. 88. ISSN 2306-5354

I

Ishihara, Yu and Takahashi, Masaki (2023) Image-based robot navigation with task achievability. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Issa, Mohamad and Fiset, Jean and Ibrahim, Hussein and Ilinca, Adrian (2019) Eco-Friendly Selection of Diesel Generator Based on Genset-Synchro Technology for Off-Grid Remote Area Application in the North of Quebec. Energy and Power Engineering, 11 (05). pp. 232-247. ISSN 1949-243X

J

Jabeen, Salma and Alam, Sultan and Shah, Luqman Ali and Zahoor, Muhammad and Rahman, Najeeb Ur and Khan, Farhat Ali and Ullah, Riaz and Ali, Essam A. and Murthy, H. C. Ananda and Sohail, Aamir and Rehman, Rabia (2022) Removal of Safranin-T and Toluidine from Water through Gum Arabic/Acrylamide Hydrogel. Adsorption Science & Technology, 2022. pp. 1-17. ISSN 0263-6174

Jemberie, Hibret Andualem and Demiss, Belachew Asteray and Reda, Shumet Getahun (2024) Comparative Analysis of Precast and In situ Concrete and Their Effectiveness on Koga Irrigation Structures. Journal of Engineering Research and Reports, 26 (2). pp. 33-50. ISSN 2582-2926

Jia, Wenhang (2024) Image Segmentation Solutions for Improved Non-Cooperative Target Recognition. Journal of Engineering Research and Reports, 26 (2). pp. 236-242. ISSN 2582-2926

Jiang, Lei-Yong and Campbell, Ian (2021) An Attempt of Large Eddy Simulation (LES) for Combustor Modeling. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 174-191. ISBN 978-93-90768-48-6

K

Kankam, Charles Kwame and Thomas, Akyen (2022) Comparative Study of the Compressive Strength of Concrete made from Different Brands of Cements in Ghana. Journal of Engineering Research and Reports, 23 (9). pp. 41-49. ISSN 2582-2926

Kar, Saurav and Das, Puspendu and Das, Pritha and Mondal, Anup Kumar (2022) Incorporation of Class C and Class F Fly Ash in Concrete Mix: Effect on Rheological and Strength Properties. In: Technological Innovation in Engineering Research Vol. 7. B P International, pp. 161-172. ISBN 978-93-5547-782-8

Kennedy, Senthil Maharaj and Robert, R.B. Jeen and Seenikannan, P. and Arunachalam, Vasanthanathan and Amudhan, K. (2023) An investigation on mechanical properties of 3D pen fused zones for additive manufactured parts. Engineering Solid Mechanics, 11 (3). pp. 263-270. ISSN 22918744

Kenny, Jon-Émile Stuart and Clarke, Geoffrey and Myers, Matt and Elfarnawany, Mai and Eibl, Andrew M. and Eibl, Joseph K. and Nalla, Bhanu and Atoui, Rony (2021) A Wireless Wearable Doppler Ultrasound Detects Changing Stroke Volume: Proof-of-Principle Comparison with Trans-Esophageal Echocardiography during Coronary Bypass Surgery. Bioengineering, 8 (12). p. 203. ISSN 2306-5354

Kho, Seonghee and Park, Hyunbum (2021) Design of the Electronic Engine Control Unit Performance Test System of Aircraft. Aerospace, 8 (6). p. 158. ISSN 2226-4310

King, Christine E. and Eliseyev, Andrey and Gonzales, Ian Jerome and Le, Anh and Doyle, Kevin and Egbebike, Jennifer and Velazquez, Angela and Agarwal, Sachin and Roh, David and Park, Soojin and Connolly, E. Sander and Claassen, Jan (2021) Development of a brain-computer interface for patients in the critical care setting. PLOS ONE, 16 (1). e0245540. ISSN 1932-6203

Kumar Dhamala, Man and Koirala, Madan and Prasad Khatiwada, Ram and Deshar, Rashila (2021) Bottlenecks in Expanding Science and Technology Education in Nepal: An Exploratory Study. Aerospace.

L

Lemmettylä, Teemu and Heikkinen, Teemu and Ohtonen, Olli and Lindinger, Stefan and Linnamo, Vesa (2021) The Development and Precision of a Custom-Made Skitester. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Li, Tengmu and Wang, Zhi-Yuan (2024) Post-Event Restoration Programming for Power System: A Case Study of Yunnan, China. In: Current Approaches in Engineering Research and Technology Vol. 4. B P International, pp. 23-44. ISBN 978-81-974068-0-5

Li, Wanqing and Wang, Kai and Hu, Pinduan (2019) Progress in Analysis of Key Technologies for Dynamic Wireless Charging of Electric Vehicles. Energy and Power Engineering, 11 (05). pp. 201-208. ISSN 1949-243X

Lozano, Adolfo and Hayes, Jody C. and Compton, Lindsay M. and Hassanipour, Fatemeh (2021) Pilot Clinical Study Investigating the Thermal Physiology of Breast Cancer via High-Resolution Infrared Imaging. Bioengineering, 8 (7). p. 86. ISSN 2306-5354

Løwer, Jostein and Varagnolo, Damiano and Stavdahl, Øyvind (2023) Improved Jacobian matrix estimation applied to snake robots. Frontiers in Robotics and AI, 10. ISSN 2296-9144

M

Magalhaes, Carolina and Mendes, Joaquim and Vardasca, Ricardo (2021) Meta-Analysis and Systematic Review of the Application of Machine Learning Classifiers in Biomedical Applications of Infrared Thermography. Applied Sciences, 11 (2). p. 842. ISSN 2076-3417

Mahmoud, Hanan Ahmed Hosni and Hakami, Nada Ali and Hafez, Alaaeldin M. and Kooh, Muhammad Raziq Rahimi (2022) An Intelligent Deep Learning Model for CO 2 Adsorption Prediction. Adsorption Science & Technology, 2022. pp. 1-15. ISSN 0263-6174

Malik, Sumaiya and Abid, Syed Golam and Rafi, Tasfiq Ahmed and Bhuyan, Muhibul Haque (2024) Design, Testing, Evaluation, and Implementation of an Arduino-based Mosquito-Repellent System. Journal of Engineering Research and Reports, 26 (3). pp. 12-24. ISSN 2582-2926

Medina, Jose (2021) Analysis of Piles and Piers Foundation Subjected to Lateral Load in Seismic and Static Condition. In: New Approaches in Engineering Research Vol. 8. B P International, pp. 58-95. ISBN 978-93-91473-64-8

Mekić, Adin and Mohammadi Ziabari, Seyed Sahand and Sharpanskykh, Alexei (2021) Systemic Agent-Based Modeling and Analysis of Passenger Discretionary Activities in Airport Terminals. Aerospace, 8 (6). p. 162. ISSN 2226-4310

Merrilees, Mervyn and Buunk, Neil and Zuo, Ning and Larsen, Nigel and Karimi, Samaneh and Tucker, Nick (2021) Use of Stacked Layers of Electrospun L-Lactide/Glycolide Co-Polymer Fibers for Rapid Construction of Skin Sheets. Bioengineering, 8 (1). p. 7. ISSN 2306-5354

Mirmozaffari, Mirpouya and Shadkam, Elham and Khalili, Seyed Mohammad and Yazdani, Maziar (2021) Developing a Novel Integrated Generalised Data Envelopment Analysis (DEA) to Evaluate Hospitals Providing Stroke Care Services. Bioengineering, 8 (12). p. 207. ISSN 2306-5354

Montalvo-Andía, Javier and Reátegui-Romero, Warren and Peña-Contreras, Alexis D. and Zaldivar Alvarez, Walter F. and King-Santos, María E. and Fernández-Guzmán, Víctor and Guerrero-Guevara, José Luis and Puris-Naupay, Jhon E. and Mondal, Monoj Kumar (2022) Adsorption of Cd (II) Using Chemically Modified Rice Husk: Characterization, Equilibrium, and Kinetic Studies. Adsorption Science & Technology, 2022. pp. 1-17. ISSN 0263-6174

Mostafa, Mohamed K. and Mahmoud, Ahmed S. and Mahmoud, Mohamed S. and Nasr, Mahmoud and Salvestrini, Stefano (2022) Computational-Based Approaches for Predicting Biochemical Oxygen Demand (BOD) Removal in Adsorption Process. Adsorption Science & Technology, 2022. pp. 1-15. ISSN 0263-6174

Muzzammel, Raheel and Khail, Ibrahim and Tariq, Muhammad Huzaifa and Asghar, Abubakar Muhammad and Hassan, Ali (2019) Design and Power Flow Analysis of Electrical System Using Electrical Transient and Program Software. Energy and Power Engineering, 11 (04). pp. 186-199. ISSN 1949-243X

N

Nguyen, Thanh-Binh and Dinh Thi, Thuy Hang and Dinh Thi, Kim Hue and Bui Minh, Hien and Nguyen Thi, Ngoc Quynh and Vu Ngoc, Duy and Nguyen Dinh, Bang and Bonilla-Petriciolet, Adrián (2022) N-TiO2-δ/g-C3N4 Dual Photocatalysts for Efficient Oxytetracycline Hydrochloride Photodegradation and CO2 Photoreduction. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Nikbakht, Ehsan and Gad, Mahmoud and Chang, Jia Wei (2024) Push-out tests on steel composite sections with engineered cementitious composite. Engineering Solid Mechanics, 12 (1). pp. 11-16. ISSN 22918744

Nisia, T. Gladima and Rajesh, S. (2021) Classification of High-resolution Images with Local Binary Pattern and Convolutional Neural Network: An Advanced Study. In: New Approaches in Engineering Research Vol. 3. B P International, pp. 1-6. ISBN 978-93-91312-89-3

Nnanna, Innocent and Arua, Julius Egwu (2022) Productivity Improvement through Work Study Techniques: A Case of a Modern Rice Mill in Ikwo, Ebonyi State. Journal of Engineering Research and Reports, 23 (12). pp. 193-203. ISSN 2582-2926

O

Ogidi, Samuel and Yusuf, Mistura and Sanni, Khadijah and Andrea, Dallacoasta and Abdulsalam, Abdullahi (2024) Removal of Heavy Metals from Produced Water Using Activated Carbon from Coconut Husk Enhanced with Graphene Oxide. Journal of Engineering Research and Reports, 26 (5). pp. 42-52. ISSN 2582-2926

Onyejiuwa, Chime Thompson and Chijioke, Eme Njoku and Maxwell, Onoh Ikechukwu (2022) Optimization Study on the Filtration Loss of Water Based Drilling Fluid using Groundnut (Arachis hypogaea) Shells Cellulose. Journal of Engineering Research and Reports, 23 (6). pp. 64-72. ISSN 2582-2926

Opare, Wisdom and Adjardjah, Winfred and Afonaa-Mensah, Stephen and Addor, John Awuah (2023) The Impact of Roof Coating and Solar PV System in the Tropical Region of Ghana. Journal of Engineering Research and Reports, 25 (9). pp. 83-96. ISSN 2582-2926

O’Reilly, Dillon and Herdrich, Georg and F. Kavanagh, Darren (2021) Electric Propulsion Methods for Small Satellites: A Review. Aerospace, 8 (1). p. 22.

P

Paschalidou, Annoula and Tsatiris, Michael (2021) SWOT Analysis of Perennial vs Annual Energy Crops: A Case Study in Greece. In: New Approaches in Engineering Research Vol. 3. B P International, pp. 16-48. ISBN 978-93-91312-89-3

Paszkiewicz, Andrzej and Salach, Mateusz and Strzałka, Dominik and Budzik, Grzegorz and Nikodem, Alicja and Wójcik, Hubert and Witek, Marcin (2021) VR Education Support System—A Case Study of Digital Circuits Design. Energies, 15 (1). p. 277. ISSN 1996-1073

Patil, Satish A. and Arakerimath, R. R. (2021) ANN Validation of Biodiesel Synthesis Optimization using Heterogeneous Catalyst (SiO2). In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 168-173. ISBN 978-93-90768-48-6

Pollet, Andreas M.A.O. and den Toonder, Jaap M.J. (2020) Recapitulating the Vasculature Using Organ-On-Chip Technology. Bioengineering, 7 (1). p. 17. ISSN 2306-5354

Ponnusamy, Muruganantham and Natrayan, L. and Patil, Pravin P. and Velmurugan, G. and Keno, Yirga Terefe and Pasha, S.K. Khadheer (2022) Statistical Analysis on Interlaminar Shear Strength of Nanosilica Addition with Woven Dharbai/Epoxy Hybrid Nanocomposites under Cryogenic Environment by Taguchi Technique. Adsorption Science & Technology, 2022. pp. 1-9. ISSN 0263-6174

Ponnusamy, Muruganantham and Natrayan, L. and Patil, Pravin P. and Velmurugan, G. and Thanappan, Subash and Modigunta, Jeevan Kumar Reddy (2022) Multiresponse Optimization of Mechanical Behaviour of Calotropis gigantea/Nano-Silicon-Based Hybrid Nanocomposites under Cryogenic Environment. Adsorption Science & Technology, 2022. pp. 1-14. ISSN 0263-6174

Preethi, T. and Senthil, K. and Pachamuthu, M. P. and Balakrishnaraja, R. and Sundaravel, B. and Geetha, N. and Bellucci, Stefano and Kyzas, George (2022) Effect of Fe Doping on Photocatalytic Dye-Degradation and Antibacterial Activity of SnO2 Nanoparticles. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

R

Ramella, Giuliana (2021) Hair Removal Combining Saliency, Shape and Color. Applied Sciences, 11 (1). p. 447. ISSN 2076-3417

Rani, V. G. (2021) Study on Maximum Trusted Cluster Head Selection Algorithm for MANET. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 149-158. ISBN 978-93-90768-48-6

Rodríguez-Sifuentes, Lucio and Marszalek, Jolanta Elzbieta and Hernández-Carbajal, Gerardo and Chuck-Hernández, Cristina (2021) Importance of Downstream Processing of Natural Astaxanthin for Pharmaceutical Application. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

S

Saccardi, Leonie and Schiebl, Jonas and Weber, Katharina and Schwarz, Oliver and Gorb, Stanislav and Kovalev, Alexander (2021) Adhesive Behavior of Propolis on Different Substrates. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Sadeghzadeh-Nokhodberiz, Nargess and Iranshahi, Mohammad and Montazeri, Allahyar (2023) Vision-based particle filtering for quad-copter attitude estimation using multirate delayed measurements. Frontiers in Robotics and AI, 10. ISSN 2296-9144

Scherge, Matthias and Stoll, Melissa and Moseler, Michael (2021) On the Influence of Microtopography on the Sliding Performance of Cross Country Skis. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

Serpilli, Michele and Zitti, Gianluca and Dellabella, Marco and Castellani, Daniele and Maranesi, Elvira and Morettini, Micaela and Lenci, Stefano and Burattini, Laura (2021) A Preliminary Validation of a New Surgical Procedure for the Treatment of Primary Bladder Neck Obstruction Using a Computational Modeling Approach. Bioengineering, 8 (7). p. 87. ISSN 2306-5354

Shasha, Si and Zhaofeng, Wang and Wenhao, Zhang and Juhua, Dai and Gollakota, Anjani Ravi Kiran (2022) Study on Adsorption Model of Deep Coking Coal Based on Adsorption Potential Theory. Adsorption Science & Technology, 2022. pp. 1-13. ISSN 0263-6174

Sheikh, Protik Parvez and Riyad, Tarifuzzaman and Tushar, Bezon Dey and Alam, Sadman Shahriar and Ruddra, Istiaq Mahmood and Shufian, Abu (2024) Analysis of Patient Health Using Arduino and Monitoring System. Journal of Engineering Research and Reports, 26 (3). pp. 25-33. ISSN 2582-2926

Shi, Wenbo and Wang, Yong and Li, June and Yan, Yunsong and Chen, Xiong and Yu, Fajiang and Zhao, Siyu and Yu, Tongwei and Feng, Ke (2021) A semi-centralized blockchain system with multi-chain for auditing communications of Wide Area Protection System. PLOS ONE, 16 (1). e0245560. ISSN 1932-6203

Sigmarsdottir, Thora Bjorg and McGarrity, Sarah and de Lomana, Adrián López García and Kotronoulas, Aristotelis and Sigurdsson, Snaevar and Yurkovich, James T. and Rolfsson, Ottar and Sigurjonsson, Olafur Eysteinn (2021) Metabolic and Transcriptional Changes across Osteogenic Differentiation of Mesenchymal Stromal Cells. Bioengineering, 8 (12). p. 208. ISSN 2306-5354

Simon, Franck and Moreira-Pereira, Jadson and Lamontagne, Jean and Cloutier, Rejean and Goulet, Francine and Chabaud, Stéphane (2021) Second Generation of Tissue-Engineered Ligament Substitutes for Torn ACL Replacement: Adaptations for Clinical Applications. Bioengineering, 8 (12). p. 206. ISSN 2306-5354

Sinha, Saket and Sinha, Pramod Kumar (2021) The Use of Quantum Mechanics to Predict a Room's Cooling Load. In: New Approaches in Engineering Research Vol. 5. B P International, pp. 133-142. ISBN 978-93-91312-97-8

Song, Xiaolei and Liu, Meihong and Hu, Xiangping and Wang, Xueliang and Liao, Taohong and Sun, Junfeng (2021) Numerical Analysis of Flow across Brush Elements Based on a 2-D Staggered Tube Banks Model. Aerospace, 8 (1). p. 19.

Soydemir, Emre and Petratos, Panagiotis (2021) Monte Carlo Analysis: An Application to Aircraft Design and Crash. Aerospace, 8 (6). p. 161. ISSN 2226-4310

Stanislav, Petrov and Volodymyr, Korzhyk (2021) Innovative Silicon Solutions in the Field of Renewable Energy. In: New Approaches in Engineering Research Vol. 5. B P International, pp. 96-120. ISBN 978-93-91312-97-8

Syed, Ahad and Kerdi, Sarah and Qamar, Adnan (2021) Bioengineering Progress in Lung Assist Devices. Bioengineering, 8 (7). p. 89. ISSN 2306-5354

Süess, Pascal and Schneider, Bruno and Wüthrich, Dario and Wüthrich, Silas and Herrmann, Kai (2021) A Specifically Designed Injector for Controlled Lube Oil Addition in View of Investigation of Pre-Ignition Phenomena in Dual–Fuel/Gas Engines. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

T

Tran, Anh Phong and Meldon, Jerry H. and Sontag, Eduardo D. (2021) Transient Diffusion in Bi-Layer Composites With Mass Transfer Resistance: Exact Solution and Time Lag Analysis. Frontiers in Chemical Engineering, 2. ISSN 2673-2718

Trzun, Zvonko and Vrdoljak, Milan and Cajner, Hrvoje (2021) The Effect of Manufacturing Quality on Rocket Precision. Aerospace, 8 (6). p. 160. ISSN 2226-4310

V

Valli, N. Adithya and Rani, D. Elizabath and Kavitha, C. (2021) Study on Conventional vs. Convolutional Windows for Reduction of Side Lobes. In: Recent Developments in Engineering Research Vol. 12. B P International, pp. 159-167. ISBN 978-93-90768-48-6

Vemanaboina, Harinadh and Gundabattini, Edison and Kumar, Kaushik and Ferro, Paolo and Sridhar Babu, B and De Jesus, Abílio (2021) Thermal and Residual Stress Distributions in Inconel 625 Butt-Welded Plates: Simulation and Experimental Validation. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Vetrivel Sezhian, M. and Giridharan, K. and Peter Pushpanathan, D. and Chakravarthi, G. and Stalin, B. and Karthick, Alagar and Manoj Kumar, P. and Bharani, Murugesan and Pilone, Daniela (2021) Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints. Advances in Materials Science and Engineering, 2021. pp. 1-13. ISSN 1687-8434

Vinci, Giuliana and Ruggeri, Marco (2021) An Overview of Graphene Based Application. In: New Approaches in Engineering Research Vol. 3. B P International, pp. 7-15. ISBN 978-93-91312-89-3

Vyavhare, Kimaya and Sharma, Vibhu and Sharma, Vinay and Erdemir, Ali and Aswath, Pranesh B. (2021) XANES Study of Tribofilm Formation With Low Phosphorus Additive Mixtures of Phosphonium Ionic Liquid and Borate Ester. Frontiers in Mechanical Engineering, 7. ISSN 2297-3079

W

Wada, Daichi and A. Araujo-Estrada, Sergio and Windsor, Shane (2021) Unmanned Aerial Vehicle Pitch Control Using Deep Reinforcement Learning with Discrete Actions in Wind Tunnel Test. Aerospace, 8 (1). p. 18.

Wu, Hao and Yang, Jie and Wang, Qiaomei and Chen, Leilei (2019) Overview of Distribution Network Fault Location. Energy and Power Engineering, 11 (05). pp. 209-219. ISSN 1949-243X

X

Xu, Yujia and Kirchner, Michele (2021) Collagen Mimetic Peptides. Bioengineering, 8 (1). p. 5. ISSN 2306-5354

Xue, Bing and Liu, Junzhao and Zhang, Dong and Tang, Qiuju and Xu, Hongbin and Huang, Shanheng and Shang, Dan and Liu, Ruxue (2021) Water quality assessment and source identification of the Shuangji River (China) using multivariate statistical methods. PLOS ONE, 16 (1). e0245525. ISSN 1932-6203

Y

Yang, Fujian and Wang, Guoxin and Li, Mingxin (2021) Evaluation of the Seismic Retrofitting of Mainshock-Damaged Reinforced Concrete Frame Structure Using Steel Braces with Soft Steel Dampers. Applied Sciences, 11 (2). p. 841. ISSN 2076-3417

Yeboua, Siaman Paule Carine and N’Goran, Yao and Konan, Kouakou (2019) Classification of Hourly Clearness Index of Solar Radiation in the District of Yamoussoukro. Energy and Power Engineering, 11 (05). pp. 220-231. ISSN 1949-243X

Yenealem, Hewan Getachew and Redda, Daniel T. and Mohammedseid, Awel (2023) The effect of hardness matching of rail/wheel materials on wear rate of railway wheel. Engineering Solid Mechanics, 11 (3). pp. 271-280. ISSN 22918744

Yeung, David A. and Kelly, Natalie H. (2021) The Role of Collagen-Based Biomaterials in Chronic Wound Healing and Sports Medicine Applications. Bioengineering, 8 (1). p. 8. ISSN 2306-5354

Z

Zeng, Guixiang and Pan, Wenyi and Lin, Qian and Fang, Ruiru and Lin, Haiyan and Huang, Jing (2021) Studies on the Photovoltaic Property of the Triphenylamine Organic Dye Using Density Functional Theory. In: New Approaches in Engineering Research Vol. 5. B P International, pp. 88-95. ISBN 978-93-91312-97-8

Zhang, Fengrui and Jiang, Annan and Guo, Xinping and Yang, Xiurong and Calado, Veronica (2021) Creep Parameter Inversion and Long-Term Stability Analysis of Tunnel Based on GP-DE Intelligent Algorithm. Advances in Materials Science and Engineering, 2021. pp. 1-14. ISSN 1687-8434

Zhang, Jingbin and Lv, Miao and An, Xuehui and Shen, Dejian and He, Xinyi and Nie, Ding and Tang, Shengwen (2021) Improved Powder Equivalence Model for the Mix Design of Self-Compacting Concrete with Fly Ash and Limestone Powder. Advances in Materials Science and Engineering, 2021. pp. 1-12. ISSN 1687-8434

Zhu, Honglei and Jin, Lian and Huang, Yanqi and Wu, Xiaomei (2021) A Computer Simulation Research of Two Types of Cardiac Physiological Pacing. Applied Sciences, 11 (1). p. 449. ISSN 2076-3417