Items where Subject is "Materials Science"

Article

Abdullahi, Ayinde Muhammed and Salihu, Ibrahim and John, Sabo and Daniel, Silas (2023) The Physical Application of Motion Using Single Step Block Method. Journal of Materials Science Research and Reviews, 6 (4). pp. 708-719.

Aftab, Hrithita and Rahman, G. M. Shafiur and Kamruzzaman, Md. and Khan, Mubarak A. and Ali, Md. Farhad and Mamun, Muhammad Abdullah Al (2024) Development of Brewed Tea Waste Reinforced Jute Polyester Composites: Physical, Mechanical, Structural and Morphological Characterizations. Journal of Materials Science Research and Reviews, 7 (1). pp. 1-16.

Ajala, Lawrence Olusegun and Odewale, Isiaka Olajide and Osonwa, Norbert Okechinyere (2024) Revolutionizing Ceramic Artistry: Harnessing the Potential of Cow Bone Ash as a Sustainable Opacifier in Enamel Production. Journal of Materials Science Research and Reviews, 7 (1). pp. 74-79.

Ather, Muhammad Fahad and Tassaduq, Malka and Hussain, Ashraf and Munawar, Tayyaba and Ismail, Rafia and Abbasi, Abdul Basit and Ibrahim, Muhammad and Muhammad, Faqeer (2024) Synergistic Design of Co3O4 Nanoparticles for Advanced Supercapacitor Electrodes: Hydrothermal Synthesis, Characterization, and Performance Evaluation. Journal of Materials Science Research and Reviews, 7 (2). pp. 227-237.

Blessing, Adindu Chinonso (2023) In-Silico Screening of Lung Cancer Inhibiting Potential of the Chemical Constituents of N-Hexane Extract of Elaisi guineenses. Journal of Materials Science Research and Reviews, 6 (3). pp. 572-582.

Chatterjee, Debasish (2023) A Novel Filter Tundish towards Improving Quality and Yield of Steel for Single Strand Slab Casting. Journal of Materials Science Research and Reviews, 6 (4). pp. 687-697.

Chigoziri Nwuzor, Iheoma and James Adinoyi, Baba and Macanthony Ewulonu, Chinomso and Lekwuwa Chukwuneke, Jeremiah and Nnaemeka Obika, Echezona (2022) Combined Natural Dye Extractor and Dryer Fabrication Process. Journal of Materials Science Research and Reviews, 5 (3). pp. 375-385.

Frant, Michał and Kiszkowiak, Łukasz and Majcher, Maciej and Zalewski, Piotr (2024) Experimental Tests and Numerical Analysis of Aerodynamic Properties of the Composite-Made Jet-Propelled Aerial Target. Materials, 17 (14). p. 3575. ISSN 1996-1944

Kopparthi, Nandavardhan Reddy and Schuster, Jens and Shaik, Yousuf Pasha (2024) Fabrication and Characterization of Bamboo—Epoxy Reinforced Composite for Thermal Insulation. Open Journal of Composite Materials, 14 (01). pp. 15-32. ISSN 2164-5612

Max, Seke Vangu and Charles, Pongo Pongo and Hochéà, Pongo Pongo Kalang and Nathalie, Musuamba Kabengele and Eric, Kisonga Manuku and Robert, Mungyeko Bisulandu Baby-Jean (2023) Study and Modeling of the Grinding Kinetics of Reactive Rocks in a Cement Laboratory. Journal of Minerals and Materials Characterization and Engineering, 11 (06). pp. 224-248. ISSN 2327-4077

Muhetaier, Mieradilijiang and Chen, Henglei and Feng, Guangwen and Jing, Qun and Liu, Qi and Yin, Zilong (2024) Effect of Dopant Concentration on Luminescence Properties of KCaPO4:Sm. Materials Sciences and Applications, 15 (07). pp. 155-167. ISSN 2153-117X

Okeyode, Ayodeji I. and Okuyelu, Olanrewaju M. (2023) Design and Fabrication of a Multi-functional Electric-solar Driven Dryer: Performance Evaluation Using Cassava and Red Pepper. Journal of Materials Science Research and Reviews, 6 (4). pp. 890-901.

Seiny Roger, N’dri and Mariame, Coulibaly and Alfred, Yao N’guessan and Drissa, Bamba and Guessan Elogne, Zoro (2022) Redox Characterization of the Ferri/Ferrocyanide System on the P-type Silicon Paste Electrode for Biosensor Application. Journal of Materials Science Research and Reviews, 5 (3). pp. 366-374.

Book Section

Jadhav, Archana D. and Barhate, Pankaj U. (2024) One Pot Synthesis Routes for Biologically Active Pyrazoles. In: Current Innovations in Chemical and Materials Sciences Vol. 5. B P International, pp. 66-74. ISBN 978-81-969723-9-4

Makhyoun, Mohamed A. and Palmer, Rex A. and Soayed, Amina A. and Refaat, Heba M. (2020) The Ni(II) Complex of 2-Hydroxy-Pyridine-N-Oxide 2- Isothionate: Synthesis, Characterization, Biological Studies, and X-ray Crystal Structures Using (1) Cu Kα Data and (2) Synchrotron Data. In: New Advances in Materials Science and Engineering Vol. 2. B P International, pp. 111-123. ISBN 978-93-89562-71-2

Navas, Daniel (2024) Morphology and Oxidation State Transitions under Hydrothermal Treatment on Vanadium Oxide (V) Systems. In: Current Innovations in Chemical and Materials Sciences Vol. 5. B P International, pp. 1-65. ISBN 978-81-969723-9-4

Noritomi, Hidetaka (2020) Effect of Solvent on Catalysis of Protease Adsorbed on Biochar in Organic Media. In: New Advances in Materials Science and Engineering Vol. 2. B P International, pp. 124-132. ISBN 978-93-89562-71-2

Noritomi, Hidetaka (2020) Thermal Stabilization of HEWL by Adsorption on Biochar. In: New Advances in Materials Science and Engineering Vol. 2q. B P International, pp. 133-141. ISBN 978-93-89562-71-2

Pathan, Shahin and Pandita, Nancy and Kishore, Nand (2024) Role of Acid Functionalized-Nano Porous Carbon/MnO2 Composite for Removal of Arsenic from Aqueous Medium. In: Current Innovations in Chemical and Materials Sciences Vol. 5. B P International, pp. 115-139. ISBN 978-81-969723-9-4

Pustovarov, V. A. and Vasin, A. A. and Zuev, M. G. (2024) Site-Selective Luminescence of Eu3+ Ions in Silicate-Tungstates: A Study on Spectroscopic Features with Apatite and Scheelite Structures. In: Current Innovations in Chemical and Materials Sciences Vol. 5. B P International, pp. 92-114. ISBN 978-81-969723-9-4

Zhao, Jianguo and Suo, Boyan and Xu, Ru and Tao, Tao and Zhuang, Zhe and Liu, Bin and Zhang, Xiong and Chang, Jianhua (2024) Heteroepitaxial Growth of Nonpolar (1120)-Plane GaN Film via Composite Buffer Layer for the Promising Nonpolar GaN-based Devices. In: Current Innovations in Chemical and Materials Sciences Vol. 5. B P International, pp. 75-91. ISBN 978-81-969723-9-4