The Use of the Biomass of a Macromycete Fungus for the Bioremediation of Chromium (VI) in Solution

Recently, the removal capacity of different heavy metals from sites contaminated by low-cost materials has been studied, with promising results. These adsorbents include dead microorganisms, clay minerals, agricultural waste, industrial waste, and other materials. The objective of this work was studying the removal capacity of Cr (VI) by a commercial mushroom, the macromycete Agaricus bisporus (white strain), by the Diphenylcarbazide colorimetric method It was found that the biomass removal 100 mg/L of the metal at 21 minutes, pH 1.0, 28oC, and 100 rpm. On the other hand, if the concentration of the metal is increased, the removal capacity for the analyzed biomass decreases at 28oC. 200 mg/L are removal at 60 minutes, while with 1 g/L of the metal, its removal 90.3%. If the concentration of the bioadsorbent is increased, the removal of the metal also increases, and the presence of other heavy metals does not influence in the removal of the metal, and this was desorbed 70.4%, with NaOH 0.5 N. Finally, it was observing that after 7 days of incubation, 76.2%, and 66.1%, of Cr (VI) present in naturally contaminated earth and water, were removal, respectively.